環氧地坪是一種高強度、耐磨損、美觀潔凈的地面，根據用途要求有多種環氧地坪系統，如電子廠房常用的環氧防靜電地坪，食品廠常用聚氨酯砂漿環氧地坪，煙廠常用環氧彩砂等。環氧地坪漆是高價值、高質量、高要求的產品，正確的使用方法和維護保養可使地面常保如新，并且可以保長使用年限。那么，如何保養和維護環氧地坪呢？以下是北京航特地坪漆給您提出的具體建議：

Epoxy floor is a kind of high-strength, wear-resistant, beautiful and clean ground. According to the requirements of use, there are many kinds of floor systems, such as epoxy anti-static floor commonly used in electronic factory, polyurethane mortar floor commonly used in food factory, epoxy color sand commonly used in tobacco factory, etc. Epoxy floor paint is a high-value, high-quality and high-demand product. Proper use and maintenance can keep the floor fresh and prolong the service life. Then, how to maintain and maintain the epoxy floor? The following are the specific suggestions for Beijing Aerospace paint. 

1、環氧地坪施工完畢后，在保養期內切勿使用，養護5-7天，避免其他液體浸潤表面，并須加強通風設備及防火措施。

1. After the construction of epoxy floor, do not use it during the maintenance period. Maintain for 5-7 days to avoid other liquid infiltrating the surface, and strengthen ventilation equipment and fire prevention measures.

2、環氧地坪使用，生產人員不準穿有鐵釘的皮鞋在上面行走，建議現場人員換成橡膠底鞋或者潔凈鞋；一切工作器具都須有固定專用車架安放，嚴禁帶有銳角的金屬零件等物件碰撞地面，造成地面涂層損壞。

2. When using epoxy flooring, production personnel are not allowed to walk on it with nailed leather shoes. It is suggested that field personnel should replace rubber soles or clean shoes; all working instruments should be installed with fixed special frame, and metal parts with sharp angles should be strictly forbidden to collide with the ground, causing damage to the ground coating.

3、現場安裝設備等重大物件須用起重機械時，在接觸環氧地面的支撐點應有厚橡皮等軟件材料墊妥，嚴禁用鐵管等金屬在環氧地面上接拖設備；叉車、鏟車卸貨時注意貨物平放，避免貨物側侄、拖、拽刮傷環氧地面，各車輛在運行時盡量避免剎車，在環氧上急剎車很容易產生胎痕，而且還清理不掉。

3. When installing equipment and other major items on site, the supporting points should be padded with thick rubber and other software materials. It is strictly forbidden to use metal pipes to connect and tow equipment on the epoxy ground. Forklift trucks and forklifts should pay attention to the placing of cargo when unloading, so as to avoid cargo side nephew, towing and scratching the epoxy ground. During operation, brake is avoided as far as possible. Brake on epoxy is easy to produce tyre marks, and it can not be cleaned up.

4、現場進行電焊等高溫作業時，在電焊火花飛濺到的地方應用石棉布等耐火材料鋪墊好，以防燒壞環氧地坪。

4. When conducting high-temperature operation such as welding on site, the asbestos cloth and other refractories should be used to pave the place where welding sparks splash to prevent burning down the epoxy floor.

5、一旦地坪有損壞，及時使用環氧地坪漆修補，以免油污通過損壞處滲透到水泥里，造成大面積涂料脫落。

5. Once the floor is damaged, use epoxy floor paint to repair it in time, so as not to penetrate into the cement through the damaged area, resulting in a large area of paint peeling off.

6、現場內大面積清洗環氧地面時，不要用強化學溶劑(甲苯、香蕉水等)一般使用洗滌劑、肥皂液、清水等，用清洗機進行，在沒有清洗機的情況下，可用鋸木粉撒上后再清掃干凈。

6. When cleaning epoxy floors in large areas on site, do not use intensified chemical solvents (toluene, banana water, etc.) generally use detergents, soap liquids, clean water, etc., and use a cleaning machine. In the absence of a cleaning machine, sawdust can be sprinkled before cleaning.